LENOVO T14 GEN 2
- Thread starter banofils
- Start date
please send device type model
for example : 20J1 - 20DA
for example : 20J1 - 20DA
20W1
"Instructions for use"
Remove all battery and CMOS battery
press F1 to enter setup: password 1234
wait 20sec or more.
Enter any ID to hardware Id.
Press 2x space bar when asked.
Turn off the computer.
and restore your original bios .
Enjoy.
If 2x 5beep, it's normal.
I didn't do checksum but it must light up anyway.
Wait minimum 30sec before screen logo light on. Must turn on/off several times by itself.
Remove all battery and CMOS battery
press F1 to enter setup: password 1234
wait 20sec or more.
Enter any ID to hardware Id.
Press 2x space bar when asked.
Turn off the computer.
and restore your original bios .
Enjoy.
If 2x 5beep, it's normal.
I didn't do checksum but it must light up anyway.
Wait minimum 30sec before screen logo light on. Must turn on/off several times by itself.
did you follow the steps above ?
The computer itself doesn't turn on; there's only a signal at the charger.
you mean even with old bios ?
NO THE OLD ONE ITS WORK BUT THE PASSWORD STIIL
i just sent your patched file above and instructions of use it
i did it with software and it has certain way
please check the file and instructions carefully
i did it with software and it has certain way
please check the file and instructions carefully
Seulement cette lumière qui s'allume
Attachments
im sending you the latest update bios file for this device :
THE SAME only a signal at the charger.
i sent the patched and the update bios file for this device
now i really don't know how can i help in this case
please reprogram old bios and check
and if you have display then follow the instructions and program the patch file
now i really don't know how can i help in this case
please reprogram old bios and check
and if you have display then follow the instructions and program the patch file
The old file working but it have password the patched and update bios not on
Attachments
insert wrong password 3 times and check if its showing any code on screen
bro i did whatever i can
this is the other new file for test which i hope it works :
this is the other new file for test which i hope it works :
Who is viewing this thread?
There are currently 0 members watching this topic
Users who has read this topic